Big-saw control in one hand.
Trim boards, prepare laser-ready stock, and handle home projects with a compact 3-3/8-inch circular saw built around a 4,500 RPM brushless motor.
O11 Pro · 85 mm bladeMove from rough board to finished room.
The compact body reaches where full-size saws feel cumbersome, making it a practical choice for flooring, baseboards, shelving, small furniture, and laser-engraving preparation.
Work close to the edge
A 10.75-inch body supports controlled handling around trim, corners, and confined work areas.
Keep renovation moving
Make repeatable wood cuts without managing a power cord across the room.
Power, control, and a cleaner path.
Choose the blade for the finish you need, monitor power at a glance, and connect a compatible shop vacuum through the included dual-size dust port.
Brushless drive
A 4,500 RPM motor provides the speed for everyday wood-cutting projects.
Two-step start
The trigger and lock-off button work together to reduce accidental starts.
Live power status
The built-in display shows battery and charging status, including a low-battery alert below 25%.
Two hose sizes
Connect 1-1/4-inch or 1-3/8-inch vacuum hoses using the supplied port system.
Swipe to explore features →
Compact enough to bring to the cut.
The adjustments stay within reach.
Depth and bevel control
Set cutting depth and adjust from 0° to 45° for straight or angled cuts.
Status at a glance
The display reports remaining battery and charging progress.
USB-C charging
Recharge the integrated battery with up to 30 W input; a full charge takes about 90 minutes.
Two blades. Straight-cut guide. Dust connection.
Use the 20-tooth blade for faster cuts or the 36-tooth blade when the finish matters more. Both blades are 3-3/8 inches (85 mm) with a 9/16-inch (15 mm) arbor.
Built-in battery
20T and 36T
32 mm and 35 mm fit
7-inch rip guide, hex key, USB-C cable, manual
Know the working limits.
The O11 Pro is designed for wood. Do not use it on metal, plastic, stone, or wood containing nails or screws.
For smoother cuts, keep the base flat, move forward steadily, and avoid forcing or twisting the saw.
Plan the next cut with confidence.
What materials can the O11 Pro cut?
It is designed for cutting wood. Avoid metal, plastic, stone, and wood containing nails or screws, which can damage or quickly dull the blade.
Which replacement blades fit?
Choose a blade with a 3-3/8-inch (85 mm) outside diameter and a 9/16-inch (15 mm) arbor hole.
What is the maximum cutting depth?
The maximum depth is 1 inch at 90° and 0.65 inch at a 45° bevel.
How do the two dust-port sizes work?
Keep the removable inner ring installed for a 1-1/4-inch (32 mm) hose, or remove it for a 1-3/8-inch (35 mm) hose.
What comes in the box?
The kit includes the O11 Pro saw, one 20T blade, one 36T blade, a dust-extraction port, 7-inch rip guide, hex key, USB-C to USB-C cable, and user manual.
How should I reduce blade binding?
Keep the base flat against the workpiece and push forward steadily. Do not press down hard, force the saw, or twist it sideways.